Learn how current rules describe Ekipnet, employer agreements and reporting. Do not confuse older interface labels with today's workflow.
What is Ekipnet and how does it relate to ISG-KATIP?
Ekipnet is an electronic module associated with registration and transaction information for authorized periodic inspectors. The Ministry's notice on the 23 December 2025 amendment says Ekipnet is defined as a module within ISG-KATIP.
Older portal names or screen instructions may not describe today's workflow. Check current Ministry guidance and system screens before acting.
The agreement between employer and inspector
The 2025 amendment calls for an agreement using the ISG-KATIP template, approved by both employer and qualified inspector before the service. The Ministry's notice specifies no later than one day before the inspection takes place.
Employer records, installation/equipment scope and inspector details should be aligned before work starts. The agreement must remain consistent with the report scope and actual inspection.
Reports, installation designs and inspection criteria
For periodic inspection of electrical, earthing and lightning-protection installations, the Ministry notice says the installation design is required. The report should identify the qualified inspector and registration information, method, findings and conclusion.
Consider equipment-specific report and criteria documents published by the Ministry at isekipmanlari.csgb.gov.tr. A generic template or old form does not replace current Ministry documents.
A pre-service checklist for employers
Before service, prepare the installation design and previous reports; share the scope, address, equipment/installation details and inspection points with the qualified inspector. Confirm agreement status and approvals in ISG-KATIP before the service.
Review the resulting report and findings against the current facility condition and follow-up actions. Periodic inspection does not replace a required design revision or corrective maintenance.
Frequently Asked Questions
Has Ekipnet been discontinued?
The Ministry's 2025 notice defines Ekipnet as a module within ISG-KATIP; follow current system guidance for transactions.
When must a periodic inspection agreement be made?
The Ministry's 2025 notice says the agreement is created and mutually approved in the system before service, no later than one day in advance.
Is the design required for electrical installation inspection?
The Ministry's 2025 notice states that the design is required when these installations are periodically inspected.
Does an Ekipnet record replace the report?
No. The system record supports inspector and transaction details; a report documenting findings and conclusions is still required.
Which report format should be used?
Check the current Ministry report and inspection criteria for the installation, and follow any applicable specific format.
Official sources and further reading
- Ministry: 23 December 2025 work-equipment regulation amendment
- Ministry periodic inspection reports and criteria
This article is for general information. Confirm document names, application steps and current requirements with the relevant authority, utility and applicable regulations.
